Of bamboo or with at least the top layer (wear layer) of bamboo:

Maps and hydrographic or similar charts of all kinds, including atlases, wall maps, topographical plans and globes, printed:

Plans and drawings for architectural, engineering, industrial, commercial, topographical or similar purposes, being originals drawn by hand; handwritten texts; photographic reproductions on sensitized paper and carbon copies of the foregoing

Blouses, shirts and tops (339)

Blouses, shirts and tops (438)

Blouses, shirts and tops (639)

Blouses, shirts and tops (639)

T-shirts, singlets, tank tops and similar garments, knitted or crocheted:

Having uppers of which over 90 percent of the external surface area (including any accessories or reinforcements such as those mentioned in note 4(a) to this chapter) is rubber or plastics except (1) footwear having a foxing or a foxing-like band applied or molded at the sole and overlapping the upper and (2) except footwear (other than footwear having uppers which from a point 3 cm above the top of the outer sole are entirely of non- molded construction formed by sewing the parts together and having exposed on the outer surface a substantial portion of functional stitching) designed to be worn over, or in lieu of, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather

Protective active footwear (except footwear with waterproof molded bottoms, including bottoms comprising an outer sole and all or part of the upper and except footwear with insulation that provides protection against cold weather) whose height from the bottom of the outer sole to the top of the upper does not exceed 15.34 cm

Bakeware (cookware not suitable for stove top use)

Bakeware (cookware not suitable for stove top use)

Bakeware (cookware not suitable for stove top use)

Bakeware (cookware not suitable for stove top use)

Bakeware (cookware not suitable for stove top use)

Bakeware (cookware not suitable for stove top use)

Bakeware (cookware not suitable for stove top use)

Bakeware (cookware not suitable for stove top use)

Set top boxes which have a communication function

Set top boxes which have a communications function

Sheets of plastics of poly(methyl methacrylate), noncellular and not reinforced, laminated, supported or similarly combined with other materials, not flexible, the foregoing of a kind used to produce counter tops or edging, cabinet tops, faces or edges for home or office furnishings (provided for in subheading 3920.51.50)

Plastic components of a kind used as one-piece internal top and bottom dividers for golf bags (provided for in subheading 3926.90.99)

Mounts of plastics, designed to secure cameras of subheading 8525.80.40 to a person's head; each mount incorporating an adjustable head-strap designed to encircle the forehead, a strap designed to cross the top of the user's head, a plastic mount designed to clip the camera to the head strap, a thumbscrew to allow the mounting of the camera and the adjustment of the viewing direction of the camera on a pivot (provided for in subheading 3926.90.99)

Staple fibers of rayon, carded, combed or otherwise processed for spinning, the foregoing presented in the form of top (provided for in subheading 5507.00.00)

Tank tops of knitted fabric of man-made fibers, containing elastomeric fibers, each such top with textile or polymer-based electrodes knitted into or attached to the fabric and that incorporates two snaps designed to secure a module designed to transmit heart rate information from the electrodes to a compatible monitor (provided for in subheading 6109.90.10)

Men's or boys' woven sleepwear of man-made fibers, the foregoing comprising tops and sleepwear bottoms presented separately and not in sets, the foregoing designed to be worn in bed (provided for in subheading 6207.99.85)

Bins of laminated woven fabric of polypropylene, rectangular or square in shape, collapsible and stackable, measuring 28 liters or more but not over 256 liters in volume and 63.5 cm or less in height, each with sewn-in cardboard inserts and fabric top panel with sewn-in cardboard insert, such panel secured to the bin with cut-to-length strips of hook-and-loop material, such bins each having a fold-down fabric panel with sewn-in cardboard insert, such panel sewn into the interior of the bin; such bins certified by the importer as meeting ASTM D642-15 standards (provided for in subheading 6307.90.98)

Protective active footwear for men (except footwear with waterproof molded bottoms, including bottoms comprising an outer sole and all or part of the upper and except footwear with insulation that provides protection against cold weather) whose height from the bottom of the outer sole to the top of the upper does not exceed 15.34 cm (provided for in subheading 6402.91.42)

Protective active footwear for women, with outer soles and uppers of rubber or plastics (except footwear with waterproof molded bottoms, including bottoms comprising an outer sole and all or part of the upper and except footwear with insulation that provides protection against cold weather) whose height from the bottom of the outer sole to the top of the upper does not exceed 15.34 cm (provided for in subheading 6402.91.42), such footwear, if valued at $26/pr or higher, without openings in the sole or upper designed to vent moisture

Protective active footwear for women, with outer soles and uppers of rubber or plastics (except footwear with waterproof molded bottoms, including bottoms comprising an outer sole and all or part of the upper ,and except footwear with insulation that provides protection against cold weather), whose height from the bottom of the outer sole to the top of the upper does not exceed 15.34 cm, covering the ankle, valued over $26/pr; where such protection is imparted by the use of a laminated textile fabric, such footwear with openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to vent moisture (provided for in subheading 6402.91.42)

Footwear for men, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), valued over $25/pair, whose height from the bottom of the outer sole to the top of the upper does not exceed 25.4 cm, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a laminated, but not coated, textile fabric; such footwear, if valued over $27, without openings in the bottom and/or side of the sole or covered opening in the upper designed to permit moisture vapor transport from under the foot (provided for in subheading 6402.91.50)

Footwear for men, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper; and except footwear designed to be protective that is incomplete in its condition as imported), valued over $27/pair, whose height from the bottom of the outer sole to the top of the upper does not exceed 25.4 cm, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection is imparted by the use of a laminated, but not coated, textile fabric; such footwear with openings in the bottom and/or side of the sole, or covered openings in the upper above the sole unit, or a combination thereof, designed to permit moisture vapor transport from under the foot (provided for in subheading 6402.91.50)

Footwear for men, with outer soles and uppers of rubber or plastics (except vulcanized footwear and footwear with waterproof molded or vulcanized bottoms, including bottoms comprising an outer sole and all or part of the upper, and except footwear designed to be protective that is incomplete in its condition as imported), valued over $25/pair, whose height from the bottom of the outer sole to the top of the upper does not exceed 25.4 cm, covering the ankle, designed to be worn in lieu of, but not over, other footwear as a protection against water, oil, grease or chemicals or cold or inclement weather where such protection includes protection against water that is imparted by the use of a coated, but not laminated, textile fabric greater than or equal to 9 microns in thickness (provided for in subheading 6402.91.50)

Footwear for men, with vulcanized uppers of neoprene measuring 7 mm in thickness, covered with a polyester knit fleece on the interior and coated with rubber on the exterior, such footwear measuring in height (from the base of the inner sole to the top of the upper) 20.32 cm or more but not over 25.4 cm, with a cemented rubber sole; the foregoing waterproof, valued per pair at $40 or higher, with each boot having a slit in the top of upper collar designed to allow boot to be affixed to a fishing wader (provided for in subheading 6404.19.20)

Footwear for men, with vulcanized uppers of neoprene measuring 7 mm in thickness, covered with a polyester knit fleece on the interior and coated with rubber on the exterior; such footwear measuring (from the base of the inner sole to the top of the upper) 20.32 cm or more but not over 25.4 cm in height, with felt outsoles; the foregoing waterproof, valued at $40 per pair or higher and with each boot having with a slit in the top of upper collar to allow boot to be affixed to a fishing wader (provided for in subheading 6405.20.90)

Riser joints of iron or steel, designed to connect drilling rigs to subsea riser containment packages, the foregoing certified by the importer as designed for high bending moments and tension at the bottom and top of riser (provided for in subheading 7326.90.86)

Vacuum insulated coffee servers, each with outer layer and liner of steel, with a capacity over 2 liters, with tightly fitted hinged lid with a center hole designed to allow brewed beverages to pass directly into such server with top lever action for dispensing (provided for in subheading 8210.00.00)

Electromechanical "hide and seek" toys, designed for use by cats or dogs, each with an electrically powered fast-moving feather wand that changes direction randomly; such wand mechanism positioned in a round enclosure of plastics, designed to allow the wand to shoot out; such toys each containing a carpeted scratching area on top (provided for in subheading 8479.89.94)

Electromechanical cat toys, each depicting a bird in a cage, such toy bird of textile materials with magnet inside its body and suspended by a string from the top of a cage comprising plastic ribs; such cage sitting on a base of plastics that contains the electrical components; with cage base having a magnetic coil designed to switch polarity and cause the bird to be in a state of continuous motion (provided for in subheading 8479.89.94)

Electromechanical burr coffee grinders, with self-contained electric motor, each presented with one clear glass top storage vessel and one clear glass bottom storage vessel (provided for in subheading 8509.40.00)

Stainless steel bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 4.7 liters but not exceeding 8.6 liters (whether or not having a single stainless steel vertically oriented welded handle), the foregoing each having a rolled top edge and two welded stainless steel side brackets with circular holes (provided for in subheading 8509.90.55)

Stainless steel bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 3.3 liters but not exceeding 4.8 liters (whether or not having a single stainless steel vertically oriented welded handle), the foregoing each having a rolled top edge and welded stainless steel base with four protrusions designed to interlock with a stand food mixer base (provided for in subheading 8509.90.55)

Electrothermic waffle makers, of a kind used for domestic purposes, with dual-sided plates positioned vertically and deep grids divided into equal quarters in a circular shape mold, with funnel on top; such appliances in stainless steel housing, with a spout including fill mark level and a release to open housing for waffle removal (provided for in subheading 8516.60.60)

Electrothermic toaster ovens of a kind used for domestic purposes, each incorporating a single-slot toaster opening on top of the oven (provided for in subheading 8516.72.00)

Electrothermic stainless steel cylindrical kettles, of a kind used for domestic purposes, each with a liquid crystal display and operational control buttons and display on top of the handle and having a translucent capacity indicator behind the handle (provided for in subheading 8516.79.00)

Exterior lights, of base metal other than of brass, such lights round in shape, with a height of 11.5 cm or more but not over 12 cm and a weight not over 1.3 kg, each containing a halogen lamp, lamp holder, reflector, autotransformer and electrical connector, the foregoing configured to be mounted to the exterior of an aircraft and designed for illuminating the top surface, leading edge and engine nacelle areas of the aircraft wings for wing icing detection (provided for in subheading 9405.40.60)

Clear or frosted columnar globes or shades, certified by the importer as of extruded borosilicate glass; the foregoing measuring 2.54 cm or more but not over 30.48 cm in length and 2.54 cm or more but not over 20.32 cm in diameter, each with circular openings at the top and bottom, designed for use on portable non-electrical lanterns for outdoor use (provided for in subheading 9405.91.40)

Coffee servers, each with exterior of stainless steel, vacuum glass liner, a hinged brew-through lid with top lever style pump and swivel base; the foregoing with capacity over 2 liters (provided for in subheading 9617.00.40)

Vacuum coffee servers, each with lining of glass, a plastic exterior, top carrying handle, see-through contents window and a brew-through lid; the foregoing with a capacity over 2 liters (provided for in subheading 9617.00.40)

Vacuum coffee servers, each with lining of stainless steel, a plastic exterior, top carrying handle, see-through contents window and a brew-through lid; the foregoing with a capacity over 2 liters (provided for in subheading 9617.00.40)